fbpx

Customisable Pteruges – Set of 5

(6 customer reviews)

£4.00£6.00

Set of 5 customisable resin pteruges for 28mm-32mm tabletop miniatures. There are 3 styles available: rounded, pointed and square.

This kit is perfect for tailoring your historical, fantasy or sci-fi models to have a Greek or Roman aesthetic. These pteruges (leather belt straps) add extra detail to your models similar to tabards and loincloths. Simply heating up the resin strips allows you to create fantastic dynamic motion in a model without needing to know how to sculpt. You can tailor the length, style and layering of your strips to perfectly customise them for your needs.

Watch the full video tutorial for using this kit. A quick guide shown in the photos and detailed at the bottom of the page. Get up to 25% off this kit via Patreon.  When available, miscast items are sold at a reduced rate. See the Kit type dropdown.

Orders will be shipped within one working week. Please allow for postal delays due to COVID-19, especially for international orders.

Clear
SKU: #PTERUGES-V1 Category:

Description

Customisable Resin Pteruges/Cingulum militare suitable for 28mm-32mm scale infantry models. 5 part resin kit containing five identical Pteruges. Each part is enough to customise one model. This kit is recommended for advanced hobbyists. Contains fragile parts that must be handled with care.

Watch the full installation video tutorial. A quick guide is given below. In the photos above you can see examples of the Pteruges used to convert and theme Primaris Intercessor Space Marines into custom chapters or specific Greek/Spartan and Roman style chapters such as Minotaurs and Ultramarines.

HOW TO:

  • Cut the strips to the desired length.
  • Separate each strip carefully and cleanup with sandpaper or a file.
  • Apply glue to the very top end of the back of the strip where you want it to join to the model.
  • Once all the strips have been glued in place you can heat them up with hot water or a hair dryer (be careful not to damage your model with excessive heat). You can now bend the resin into the desired shape.
  • Once cooled, the resin shape will remain unchanged. Keep repeating this process until you are happy.
  • Additionally, you can lightly apply superglue to the back of the strip to permanently fix the shape of the resin in place even when heated. This allows you to add each band and shape it one at a time for greater control.

Resin kits should be washed in warm soapy water before use. Resin components may vary in colour. Pressure cast for improved quality. Designed and sculpted by Philip Spence, hand cast in the UK.

Additional information

Weight 1 g
Dimensions 1.9 × 1 × 0.15 cm
Number of parts

5

Material

Polyurethane Resin

Style

Round, Point, Square, Round – Miscast, Point – Miscast, Square – Miscast

6 reviews for Customisable Pteruges – Set of 5

  1. Thibalt workshop (verified owner)

    really good product, easy to work with and add personnality to the minis, definitly recommand

  2. Scott (verified owner)

    Easy to use, look great, high quality, 10/10 would recommend.

  3. Skarr Skarrson (verified owner)

    Fantastic product, good service, really helps customise you miniatures. Video tutorial very helpful and loved the touch of the note. Thanks.

  4. Teepaintsminis (verified owner)

    Great product and super quick delivery. Also I got a hand drawn note with it 🙂

  5. JamPaints (verified owner)

    Fantastic bits and service! Delivery was very fast and the Pteruges are easy to use especially with the great in-depth tutorial video and pictures!

  6. Chapter Master Valrak

    Amazing product, fast and packed fantastically, thank you Beyond the Table Top!

Add a review

Your email address will not be published. Required fields are marked *