fbpx

Artillery Barrel Extender

£8.00

Artillery Barrel Extender, single piece resin miniature.

Designed to extend the length of artillery barrels for historical and sci-fi games at 28-32mm scale. This is compatible with any tank where you can drill an 8mm hole for the barrel extender to fit in. A guide is shown in the gallery and detailed below. In the example shown you can convert a Medusa tank into a Basilisk tank.

Orders are usually shipped within 2-3 working days but please allow up to one working week should your order need to be cast up.

SKU: #PPARTBAREX-V1 Category:

Description

Single piece resin barrel suitable for 28mm-32mm scale model vehicles.

Guide for converting the Medusa tank into a Basilisk tank:

  1. Use an 8mm drill bit to carefully drill out the barrel. You can turn the drill bit slowly by hand on resin kits, if needed you can use a smaller bit first and increase the bit size in stages. The hole will need to be 9mm deep.
  2. Paint up the inside of the barrel.
  3. Push the barrel into the hole.
  4. You’ll now have an extended artillery barrel which could be used as a Basilisk.

Single piece resin miniature. Resin kits should be washed in warm soapy water before use, some work may be needed to remove mould lines and fill in small air bubbles. If you need help you can follow the Beginers Guide to Resin.

Resin components may vary in colour. Pressure cast for improved quality. Designed and sculpted by Philip Spence, hand cast in the UK.

Additional information

Weight 4 g
Dimensions 6.5 × 0.8 × 0.8 cm
Number of parts

1

Material

Polyurethane Resin

Reviews

There are no reviews yet.

Be the first to review “Artillery Barrel Extender”

Your email address will not be published.